# Quick Answer: What Is Equivalent To M6?

## What is m6 in standard?

M6 threads are 6mm metric screws.

The standard metric rack screw is called M6 x 1.

The ‘M’ means it’s metric.

The ‘6’ is the outside diameter measured in millimeters, and the ‘1’ is the distance between adjacent threads, also in millimeters..

## Is m6 the same as 6mm?

M6 refers to a metric 6mm screw. The outside diameter of the threads is 6mm. The standard metric rack screw is actually an M6 x 1mm. … You can identify an M6 screw by measuring the diameter with a ruler at slightly more than 7/32″ (0.228″).

## Are m10 and 3/8 the same?

For example, a 3/8-16 (coarse) thread has a 3/8″ nominal major diameter and 16 threads per inch, while a 3/8-24 (fine) thread has the same nominal major diameter and 24 threads per inch. … For example, the thread “M10” automatically means a coarse pitch, while any added pitch callout, such as M10x1.

## What is a m6 nut?

The ISO metric screw threads are the most commonly used type of general-purpose screw thread worldwide. … The “M” designation for metric screws indicates the nominal outer diameter of the screw thread, in millimetres (e.g., an M6 screw has a nominal outer diameter of 6 millimetres).

## What size is m6?

Tap sizeBasic major dia (mm)Basic major dia (inch)M4 x 0.74mm.1575M5 x 0.85mm.1969M6 x 16mm.2362M8 x 1.258mm.315024 more rows

## What is the metric equivalent of 5 16?

Fractional Inches to Decimal Inches and Metric MillimetersInchesMetricFractionalDecimalmm.0.29537.500019/640.29697.54065/160.31257.9375158 more rows

## What is a #6 screw?

Screws have three basic measurements: gauge, threads per inch, and shaft length in inches. … This means it’s a #6 diameter, with 32 threads per inch (almost double the normal thread count as a standard wood screw) and an inch and a half long.

## Which is bigger m6 or m8?

The size of a metric screw or bolt is specified as diameter, pitch and length, in millimeters (millimeters is abbreviated “mm”). For nuts, size will appear as diameter and pitch….Table 3.MetricClosest InchM6-1.01/4-28 (Larger)M7-1.01/4-28 (Smaller)M8-1.255/16-18 (Smaller)M10-1.53/8-16 (Smaller)16 more rows

## What does m8 1.25 mean?

For metric fasteners, you will see a M8 x 1.25 or an M8 x 1. For thread pitch, the distance between two points is the second number meaning the higher the number the fewer threads there are. This means the M8 x 1.25 is the coarse threading and the M8 x 1 is the fine thread.

## How long is a m6 screw?

You can identify an M6 screw by measuring the diameter with a ruler. It’ll be 6 mm, or slightly more than 7/32 inches (0.228″).

## What does m6 screw size mean?

M6 refers to a metric 6mm screw. The outside diameter of the threads is 6mm. … The number “1mm” refers to 1 threads per millimeter. M6 screws are commonly used by HP. You can identify an M6 screw by measuring the diameter with a ruler at slightly more than 7/32″ (0.228″).

## Is m6 the same as 5 16?

Comparison of metric and inch fastener threads. The threads of an M14-2.0 screw, which is coarse, are spaced 0.079 inches (2.0 mm)….Table 3.MetricClosest InchM6-1.01/4-28 (Larger)M7-1.01/4-28 (Smaller)M8-1.255/16-18 (Smaller)M10-1.53/8-16 (Smaller)16 more rows

## What does m10 mean?

M10 means a 10 millimeter outer diameter for the bolt or whatever piece it is; M12 means 12 millimeters. The part after the ‘x’ is the pitch — how many mm a thread is wide. To figure out which you have, you can measure the existing part with calipers and a thread gauge.

## Is m8 the same as 8mm?

All dimensions of the bolt (and nut) are a parameter of its basic diameter. The “M8” refers to an approximation of the major diameter of the thread of 8mm – actually slightly less, like 7.9, as the sharp edges are rounded off.

## What is the metric equivalent to Grade 8?

Approximate Equivalency Chart Metric/US Roughly Equivalent US Bolt MaterialsMetric Nut ClassSAE J429Normally UsedGrades8.8859.895+10.910or 12812.910or 12.3 more rows

## What is the diameter of m6 hole?

Metric ThreadsThreadDrill size for tapping standard metric threadsClearance holeM656.6M86.89M108.511M1210.213.520 more rows

## What diameter is m8?

about 8 mmThe M8 will measure about 8 mm in diameter, more likely, just a touch undersize, (. 31496″) The M10, about 10 mm in diameter, (. 3937″) and the M12 about 12 mm in diameter, (. 4724″).